|
| Specifications |
|
Item #
|
Unit Size
|
Case
Quantity
|
|
96001
|
16 oz.
|
12
|
Price: $12.95 each
1-3 cases: 20% discount
4+ cases: 35% discount
FREE Shipping on all orders!
|
|
|
|
The Number One Cause of Vehicle Roadside Failure
is Coolant System Related! |
|
Source: NARSA (National Automotive Radiator
Service Association)
|
|
|
KOOL-IT™ Supreme Coolant Treatment is chemically engineered
to reduce the surface tension of a coolant, thus allowing it to
more deeply penetrate metal surfaces at vital heat transfer areas.
This decreases operating temperatures and significantly reduces
the possibility of engine overheating.
|
|
Cooling systems with a 50/50 mix (antifreeze /water) run 5º-7º
F cooler, and racing/performance applications using straight water
run up to 20º F cooler. (Note: KOOL-IT does not provide freeze
protection.)
Due to its unique chemical composition, KOOL-IT is very effective
in preventing electrolysis, corrosion and pitting.
The overwhelming
majority of failures associated with aluminum radiators found in
most newer cars/vehicles are due to corrosion. This corrosion is
a result of deficient chemical protection within the coolant.
KOOL-IT extends and increases the corrosion inhibiting ability
of coolants, thus preventing premature radiator failure. KOOL-IT
works just as well in older copper and/or brass radiators.
ONLY COOLANT WITH BUILT-IN PH INDICATOR
KOOL-IT is specially formulated with a built-in pH indicator,
the only product of its kind, allowing easy visual determination
of (100%) straight water coolant pH. Coolant within safe range is
light pink in color, but goes to clear if coolant pH falls dangerously
low, indicating another pint should be added. PH color indicator
registers only in straight water applications, and will not register
in antifreeze/water mixtures.
|
KOOL-IT IS IDEAL FOR:
- Cars
- Trucks
- RV’s
- Towing applications
- Racing/Performance vehicles
|
BENEFITS:
- Enhances heat transfer and reduces operating temperatures.
- Extends coolant life up to 5 years.
- Prevents cooling system corrosion.
- Protects all metals from electrolysis.
- Prevents deposits which lead to overheating.
- Reduces wet-sleeve cylinder liner cavitation erosion.
|
|
Directions For Use:
Never remove radiator cap if engine is still hot. With engine cool,
pour KOOL-IT into radiator, start engine, turn heat on high, and
run for 10 minutes. This opens the thermostat and circulates KOOL-IT
through the entire system, providing full protection to the heater
core, radiator core, water pump, cylinder heads, block, and intake
manifold. Always maintain a minimum of 15% antifreeze in cooling
systems of street driven vehicles with A/C. Ratio: One pint treats
cooling systems of 12-20 quarts. Systems with more than 20 quarts add one
ounce of KOOL-IT for each additional quart. Frequency: Add 1 pint
every year or 30,000 miles, whichever comes first. After 5th consecutive
year, drain, flush, and refill cooling system.
|
